40.6 Device Range that Can Be Set
For details on the device range of controllers that can be used on GT14 Handy, refer to the following manuals.
40.7 Precautions
Station number settings of temperature controller
In the system configuration, the controller with the station number set with the host address must be included.
For details of host address setting, refer to the following.
GOT clock control
Since the controller does not have a clock function, the settings of [time adjusting] or [time broad cast] by GOT clock
control will be disabled.
Cutting the portion of multiple connection of the controller
By setting GOT internal device, GOT can cut the portion of multiple connection of the controller. For example, faulty
station that has communication timeout can be cut from the system.
For details of the setting contents of GOT internal device, refer to the following manual.
40 - 22
40. CONNECTION TO CHINO CONTROLLER
40.6 Device Range that Can Be Set
GT Designer3 Version1 Screen Design Manual (Fundamentals)
GOT1000 Series Connection Manual (Non-Mitsubishi Products 1) for GT Works3
40.4.1 Setting communication interface (Communication settings)
GT Designer3 Version1 Screen Design Manual