Mitsubishi Electric GT14 User Manual page 374

Error
Error message
code
Insufficient memory media
330 capacity.
Confirm M-card capacity.
Memory card not installed or
331
MCARD switched OFF
332 Memory media is not formatted.
Unable to overwrite. Memory
333
card is write-protected.
Memory media error.
334
Replace memory media.
File output failed.
337
Confirm output file path.
340 Printer error or power failure.
341 Printer error
BCD/BIN conversion error
345
Correct data
Recipe file error.
351
Confirm content of recipe file.
Recipe file make error.
352 Reboot GOT after inserting
memory card.
Unable to write Recipe file.
353 Confirm memory card is
inserted.
354 Recipe file write error
355 Recipe file read error
20 - 14
20. TROUBLESHOOTING
20.2 Error Message and System Alarm
Available memory of the SD card is insufficient.
Confirm the available memory of the SD card.
The available memory can be confirmed by system information screen,
which is described in GT Designer3 Version1 Screen Design Manual
(Fundamentals).
The SD card is not installed or in the drive access switch is OFF in drive.
• Install the SD card in the specified drive.
• Turn ON the access switch.
SD card is not formatted or formatted incorrectly.
Format the SD card.
SD card is write-protected.
Cancel the write-protection of SD card.
SD card is faulty.
Replace the SD card.
Either of the following folder or file with the name same as the file to be
created exists in the storage destination SD card or USB memory.
• Folder storing data
• Write-protect file
Delete the above folder or file, or change the name of the file to be
created.
Printer is faulty or the printer power supply has not been turned on.
• 1. Confirm the printer.
• 2. Turn on the power supply of the printer.
Printer is faulty or the printer power supply has not been turned on.
• 1. Confirm the printer.
• 2. Turn on the power supply of the printer.
Any value that cannot be converted to a BCD/BIN value is being
displayed/input.
• Change the device data to be displayed to the BCD value.
• Correct the input value to the 4 digits integer.
The contents of the recipe file are not normal.
• Confirm the contents of the recipe files in the SD card or USB memory.
• Reboot the GOT after deleting the recipe file in the SD card or USB
memory (format).
Failed to generate recipe file.
Reboot the GOT after installing the SD card or USB memory.
Failed to write in the recipe file.
• Confirm the write-protection of the SD card or USB memory.
• Confirm the contents of the SD card or USB memory.
• Do not pull out the SD card or USB memory while recipe is operating.
Error occurred while writing in the recipe file.
Do not pull out the SD card or USB memory while recipe is operating.
Error occurred while reading in the recipe file.
• Do not pull out the SD card or USB memory while recipe is operating.
• Confirm the contents (device value) of the recipe file in the SD card or
USB memory.
Action
Channel No.
storage