5.
Check-mark [C24] in [PLC side I/F Detailed Setting of
GOT].
6.
The screen returns to the [Connection Channel Setup].
Click [Connection Test] to check if GX Works3 has been
connected to the RCPU.
7.
The screen returns to the [Connection Channel Setup].
Click [Connection Test] to check if GX Works3 has been
connected to the RCPU.
31.6.2 Accessing by CW Configurator
The following shows the procedure to set the FA
transparent function of CW Configurator.
When connecting the GOT and personal
computer with USB
(1) Connecting the GOT and PLC in Ethernet
connection
1.
Click [Online]
[Connection Destination] on CW
Configurator.
2.
[Connection Channel Setup] is displayed.
3.
Set [Connection Channel Setup].
PC side I/F
: USB
PLC side I/F
: GOT
Other Station Setting : No Specification
31. FA TRANSPARENT FUNCTION
31.6 Personal Computer Side Setting
25
26
27
28
29
30
31
31 - 23