Communication Detail Settings - Mitsubishi Electric GT14 User Manual

Hide thumbs Also See for GT14:
Table of Contents

Advertisement

Setting for the second GOT
Set the communication interface connecting to the first
GOT.
2.
1.
Select [Common]
menu.
2.
The Controller Setting window is displayed. Select
[CH1] from the list menu.
3.
Set the following items.
• Manufacturer: Mitsubishi
• Controller Type: Set the same setting as the first
GOT (communication interface connecting to the
PLC).
• I/F: Standard I/F (RS422/232)
• Driver: Set the same setting as the first GOT
(communication interface connecting to the PLC).
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Set the same setting as the first GOT (communication
interface connecting to the PLC).
Click the
OK
button when settings are completed.
29 - 8
29. MULTIPLE GOT CONNECTION FUNCTION
29.4 GOT Side Settings
3.
4.
Click!
[Controller Setting] from the

29.4.2 Communication detail settings

Make the settings according to the usage environment.
(1) Serial (MELSEC)
Item
Description
Set this item when change the
transmission speed used for
communication with the connected
equipment.
Transmission
(Default: 115200bps)
Speed
When the setting exceeds the limit of
the connected equipment,
communication is performed at the
fastest transmission speed supported
by the connected equipment
Set the number of retries to be
performed when a communication error
Retry
occurs.
(Default: 0time)
Set the time period for a communication
Timeout Time
to time out.
(Default: 3sec)
Set this item to adjust the transmission
timing of the communication request
Delay Time
from the GOT.
(Default: 0ms)
Range
9600bps,
19200bps,
38400bps,
57600bps,
115200bps
0 to 5times
3 to 30sec
0 to 300 (ms)

Advertisement

Table of Contents
loading

Table of Contents