Device Range That Can Be Set; Precautions - Mitsubishi Electric GT14 User Manual

52.6 Device Range that Can Be Set

For details on the device range of controllers that can be used on GT14 Handy, refer to the following manuals.

52.7 Precautions


Station number setting of the temperature controller system
• When connecting to DMC10 or SDC
Make sure to establish temperature controller system with No.1 station.
• When connecting to DMC50/AHC2001
A COM module or temperature controller with the station number set with the host address must be included.

GOT clock control
Since the control equipment does not have a clock function, the settings of "time adjusting" or "time broad cast" by
GOT clock control will be disabled.

Cutting the portion of multiple connection of the controller
By setting GOT internal device, GOT can cut the portion of multiple connection of the controller. For example, faulty
station that has communication timeout can be cut from the system.
For details of the setting contents of GOT internal device, refer to the following manual.

Combination use of DMC50/AHC2001 and DMC10/SDC
GOT does not support connections with DMC50 and DMC10/SDC mixed.

Station number range of AHC2001
Although the station number range of AHC2001 is 1 to 127, use the station number range of DMC50 of 1 to 15.

Device range of AHC2001
The GOT does not support all the devices of AHC2001.
Use AHC2001 with the GOT within the device range equivalent to that of DMC50.
52 - 44
52. CONNECTION TO AZBIL CONTROL EQUIPMENT
52.6 Device Range that Can Be Set
GT Designer3 Version1 Screen Design Manual (Fundamentals)
GOT1000 Series Connection Manual (Non-Mitsubishi Products 2) for GT Works3
52.4.2 Communication detail settings
GT Designer3 Version1 Screen Design Manual