Mitsubishi Electric GT14 User Manual page 626


GOT interface used for Ethernet connection
For the Ethernet connection, use the following interface built in the GOT.
Interface built in GOT
*1 Up to two channels can be used.
POINT POINT POINT
When using Ethernet download and gateway function
The Ethernet download and the gateway function are available with the Ethernet interface built in the GOT (one
channel).
Refer to the explanation below to check if the number of channels for the multi-channel function to be used is
restricted or not. If it is restricted, review the system configuration.
30.5
Multi-channel function check sheet
30 - 6
30. MULTI-CHANNEL FUNCTION
30.3 GOT Side Settings
Type
Ethernet interface
Write down the following items selected in this section to the check sheet.
Interface selection
Write down the name of the interface used with each type of connection.
Interface built in GOT
*1
(Continued to next page)