Personal Computer Side Setting - Mitsubishi Electric GT14 User Manual

Hide thumbs Also See for GT14:
Table of Contents

Advertisement

31.6 Personal Computer Side Setting

31.6.1 Accessing by GX Works3
The following shows the procedure to set the FA
transparent function of GX Works3.
When connecting the GOT and personal
computer with USB
(1) Connecting the GOT and PLC in Ethernet
connection
(a) When connecting to RCPU
1.
Click [Online]
[Connection Destination] on GX
Works3.
2.
[Connection Channel Setup] is displayed.
3.
Set [Connection Channel Setup].
PC side I/F
: USB
PLC side I/F
: GOT
Other Station Setting : No Specification
4.
Double-click [GOT] of the PLC side I/F to display
[PLC side I/F Detailed Setting of GOT].
5.
On the [PLC side I/F Detailed Setting of GOT], mark
the [via GOT (Ethernet) transparent mode] checkbox
and click [Setting].
6.
By clicking [Setting], the [GOT (Ethernet) Transparent
Setting] is displayed.
Here, set the built-in Ethernet port CPU or Ethernet
module, which is firstly connected via a GOT.
7.
Set [RJ71EN71] for [PLC Type].
31. FA TRANSPARENT FUNCTION
31.6 Personal Computer Side Setting
25
26
27
28
29
30
31
31 - 19

Advertisement

Table of Contents
loading

Table of Contents