Temperature Controller Side Setting; Connecting To H-Pcp-J - Mitsubishi Electric GT14 User Manual

53.5 Temperature Controller Side Setting

POINT POINT POINT
RKC temperature controller
For details of RKC temperature controller, refer to the
following manual.
User's Manual of the RKC temperature
controller
Model
H-PCP-J
H-PCP-A, H-PCP-B
Z-TIO module,
Z-DIO module,
Z-CT module
Z-COM module
CB Series
FB Series
RB Series
Temperature controller
PF900/901
HA400/401, HA900/901
AG500
RMC500
MA900, MA901
THV-A1
SA100, SA200
X-TIO module

53.5.1 Connecting to H-PCP-J


Communication settings
Make the communication settings of the temperature
controller.
Item
*1
9600bps, 19200bps, 38400bps
Transmission speed
Communication mode MODBUS
Data bit 8bits
Parity bit Disable
*1
1bit
Stop bit
*2
0 to F
Unit address
*1 Adjust the settings with GOT settings.
*2 Select the unit address without overlapping with that of other
units.
53 - 38
53. CONNECTION TO RKC TEMPERATURE CONTROLLER
53.5 Temperature Controller Side Setting
Refer to
53.5.1
53.5.2
53.5.3
53.5.4
53.5.5
53.5.6
53.5.7
53.5.8
53.5.9
53.5.10
53.5.11
53.5.12
53.5.13
53.5.14
53.5.15
Setting range

Setting DIP switches
Make the settings of transmission speed,
communication mode, data length, parity bit and stop
bit.
COM.PORT3
COM.PORT1
COM.PORT2
Front
Right side
(1) Transmission speed settings
(a) COM.PORT1/COM.PORT2
SW2
3 4
OFF OFF
ON OFF
OFF ON
(b) COM.PORT3
SW3
3 4
• OFF • OFF
• ON • OFF
• OFF • ON
COM.PORT1/COM.PORT2
setting switch (SW2)
COM.PORT3
setting switch (SW3)
Communication speed
9600bps
19200bps
38400bps
Communication speed
9600bps
19200bps
38400bps