Accessing By Nc Configurator - Mitsubishi Electric GT14 User Manual

Hide thumbs Also See for GT14:
Table of Contents

Advertisement

31.6.15 Accessing by NC Configurator

The following shows the procedure to set the FA
transparent function of NC Configurator.
1.
Click [File]
[Open].
2.
The [Open] is displayed.
3.
Select [NC] on the upper left of the screen, and set
the following:
NC series: C70 M or C70 L
Connect pattern: Set the pattern according to the
connect pattern.
IP address: Set as necessary.
4.
By clicking [Open], data is read from CNC and displayed.
31.6.16 Accessing by MELSOFT
Navigator
The following explains the procedure to set the FA
transparent function of MELSOFT Navigator.
1.
Click [Online]
[Batch Read].
2.
The [Batch Read] is displayed.
3.
Select the projects to be read from [Select Project],
and set the storage destination of the workspace in
[Save Workspace].
4.
Click [Execute] to read and display the specified
project.
31. FA TRANSPARENT FUNCTION
31.6 Personal Computer Side Setting
25
26
27
28
29
30
31
31 - 45

Advertisement

Table of Contents
loading

Table of Contents