Mitsubishi Electric GT14 User Manual page 638


When connecting the GOT and PC with USB
(1) Connecting the GOT and PLC in direct CPU connection
The following shows the software and the accessible PLC CPUs.
FX5U, FX5UC
QCPU (Q mode)
*15
LCPU
QCPU (A mode), QnA/ACPU,
Motion controller CPU (A Series)
FXCPU
Motion controller CPU (Q Series)
FREQROL A700/F700/E700/D700 Series
Sensorless Servo (FREQROL E700EX)
Robot controller (CRnQ-700)
MELSERVO (MR-J3-B)
MELSERVO (MR-J4-B)
*1 GX Developer Version 8.22Y or later is required to use the FA transparent function.
GX Developer Version 8.68W or later is required to use the FA transparent function when connecting the QnUDE(H)CPU to the
GOT.
*2 MT Developer (SW6RNC-GSVE) Version 00N or later is required to use the FA transparent function.
*3 MR Configurator (MRZJW3-SETUP221E) Version B1 or later is required to use the FA transparent function.
*4 FR Configurator (FR-SW2-SETUP-WJ) Ver.1.02 or later is required to use the FA transparent function when connecting the A700/
F700 series to the GOT.
FR Configurator (FR-SW3-SETUP-WJ) Ver.2.00 or later is required to use the FA transparent function when connecting the E700
series to the GOT.
FR Configurator (FR-SW3-SETUP-WJ) Ver.3.10 or later is required to use the FA transparent function when connecting the D700
series to the GOT.
*5 PX Developer Version 1.09K or later is required to use the FA transparent function.
PX Developer Version 1.18U or later is required to use the FA transparent function when connecting the Q02PHCPU or
Q06PHCPU to the GOT.
*6 Use GX Developer Version 8.30G or later combined with the following GX Configurator version or later to use the FA transparent
function.
*7 FX Configurator-FP Version 1.30 or later is required to use the FA transparent function.
*8 RT ToolBox2 Version 1.1 or later is required to use the FA transparent function.
*9 GX Configurator-QP Version2.32J or later is required to use the FA transparent function.
*10 MT Works2 Version 1.00A or later is required to use the FA transparent function.
*11 GX Works2 Version 1.03D or later is required to use the FA transparent function.
*12 MELSOFT Navigator Version 1.04E or later is required to use the FA transparent function.
*13 GX Developer Version 8.88S or later is required to use the FA transparent function.
*14 GX Works2 Version 1.11M or later is required to use the FA transparent function.
*15 The adapter (L6ADP-R2 or L6ADP-R4) is required.
*16 MELSOFT Navigator Version 1.07H or later is required to use the FA transparent function.
*17 MX Component Version 3.14Q or later is required to use the FA transparent function.
*18 Use MX Component Version 4.03D or later for MX Sheet.
*19 Start MR Configurator2 from MT Developer2 Version 1.10L or later.
31 - 2
31. FA TRANSPARENT FUNCTION
31.2 Compatible Software
PLC CPU
*22
*22
GX Configurator-AD: Version 2.03D or later, GX Configurator-DA: Version 2.04E or later
GX Configurator-SC: Version 2.10L or later, GX Configurator-CT: Version 1.23Z or later
GX Configurator-TI: Version 1.22Y or later, GX Configurator-TC: Version 1.21X or later
GX Configurator-AS: Version 1.20W or later, GX Configurator-FL: Version 1.21X or later
GX Configurator-PT: Version 1.20W or later
*26 *27
GX Works3 , MX Component
*12
MELSOFT Navigator
*1 *11
GX Developer , GX Works2 , PX Developer
*6
GX Configurator -AD/DA/SC/CT/TI/TC/AS/FL/PT
*9
GX Configurator-QP , MX Component
*16
MELSOFT Navigator
*13 *14
GX Developer , GX Works2 , GX LogViewer
*17 *18
MX Component , MX Sheet , CPU Module Logging Configuration Tool.
*1
GX Developer
*17 *18
MX Component , MX Sheet
*12
MELSOFT Navigator
*1 *11
GX Developer , GX Works2
*7
FX Configurator-FP
FX3U-ENET-L Configuration tool
*17 *18
MX Component , MX Sheet
*12
MELSOFT Navigator
*2
MT Developer
SW6RN-GSV13P, SW6RN-GSV22P, SW6RN-GSV43P,
SW6RN-GSV54P, SW6RN-DOSCP, SW6RN-SNETP (for user API)
*10 *23
MT Works2 , MX Component
*4
FR Configurator
*25
FR Configurator
*8
RT ToolBox2
*3
MR Configurator , MR Configurator2
*21
MR Configurator2
Software
*28
, MX Sheet
*5
*17 *18
, MX Sheet
*24
, MX Sheet
*19
*20