Station Number Setting - Mitsubishi Electric GT14 User Manual

Hide thumbs Also See for GT14:
Table of Contents

Advertisement

39.5.4 Station number setting

Set each station number so that no station number
overlaps.
The station number can be set without regard to the cable
connection order. There is no problem even if station
numbers are not consecutive.
Station
Station
No.3
No.7
GOT
Examples of station number setting
(1) Direct specification
When setting the device, specify the station number of
the indicating controller of which data is to be changed.
Specification range
0 to 94
(2) Indirect specification
When setting the device, indirectly specify the station
number of the inverter of which data is to be changed
using the 16-bit GOT internal data register (GD10 to
GD25).
When specifying the station No. from 100 to 115 on GT
Designer3, the value of GD10 to GD25 compatible to
the station No. specification will be the station No. of
the indicating controller.
Specification
Compatible
station No.
device
100
GD10
101
GD11
102
GD12
103
GD13
104
GD14
105
GD15
106
GD16
0 to 94
107
GD17
For the setting other than the above, an
error (dedicated device is out of range)
108
GD18
will occur.
109
GD19
110
GD20
111
GD21
112
GD22
113
GD23
114
GD24
115
GD25
Station
Station
Station
No.1
No.15
No.6
Setting range
39. CONNECTION TO SHINKO TECHNOS INDICATING CONTROLLER
(3) All station specification
Target station differs depending on write-in operation or
read-out operation.
• For write-in operation, all station will be a target.
In the WORD BIT write-in operation, only the
indicating controller whose station No. is the same as
host address is applicable. For details of host address
setting, refer to the following.
39.4.1 Setting communication interface
(Communication settings)
• In the read-out operation, only the indicating controller
whose station No. is the same as host address is
applicable.
For details of host address setting, refer to the
following.
39.4.1 Setting communication interface
(Communication settings)
39.5 Indicating Controller Side Setting
32
33
34
35
36
37
38
39
39 - 11

Advertisement

Table of Contents
loading

Table of Contents