Connecting To Display I/F - Mitsubishi Electric GT14 User Manual

23.2.3 Connecting to Display I/F

(1) When using the connector conversion box
PLC CPU
PLC
Communication
Model
type
CNC C70
Ethernet
(Q173NCCPU)
*3*4
*1 The destination connected with the twisted pair cable varies with the configuration of the applicable Ethernet network system.
Connect to the Ethernet module, hub, transceiver or other system equipment corresponding to the applicable Ethernet network
system.
Use cables, connectors, and hubs that meet the IEEE802.3 10BASE-T/100BASE-TX standard.
The use of shielded twisted pair cable (STP) is recommended in environments in which the performance against noise is
required.
*2 A length between a hub and a node.
The maximum distance differs depending on the Ethernet device to be used.
The following shows the number of the connectable nodes when a repeater hub is used.
• 10BASE-T: Max. 4 nodes for a cascade connection (500m)
• 100BASE-TX: Max. 2 nodes for a cascade connection (205m)
When switching hubs are used, the cascade connection between the switching hubs has no logical limit for the number of
cascades.
For the limit, contact the switching hub manufacturer.
*3 For the system configuration of the CNC C70, refer to the following manual.
*4 Select [Q17nNC] for [Type] in [Ethernet] of GT Designer3.
For [Ethernet] of GT Designer3, refer to the following.
*5 Use C or later version of GT11H-C-37P.
CNC
C70
Connection cable
*1
Connection cable
• 10BASE-T
Shielded twisted pair cable
(STP)
GT16H-CNB-42S
or
Unshielded twisted pair cable
(UTP)
Category 3, 4, and 5
• 100BASE-TX
GT16H-CNB-37S
Shielded twisted pair cable
(STP)
Category 5 and 5e
C70 Series SET UP MANUAL
23.3.3 Ethernet setting
Connector
conversion box
Connector
External cable
conversion box
GT14H-C30-42P(3m)
GT14H-C60-42P(6m)
GT14H-C100-42P(10m)
GT11H-C30-37P (3m)
GT11H-C60-37P (6m)
GT11H-C100-37P(10m)
23. ETHERNET CONNECTION
23.2 System Configuration
Communication driver
Ethernet(MELSEC),Q17nNC,CRnD-700
GOT
External cable
Maximum Number of
GOT
*5
segment connectable
model
length equipment
16 GOTs for 1
*2
100m
network
17
18
19
20
21
22
23
24
23 - 11