Plc Side Setting - Mitsubishi Electric GT14 User Manual

41.2.5 PLC side setting

POINT POINT POINT
TOSHIBA PLC
For details of the TOSHIBA PLC, refer to the following
manual.
TOSHIBA PLC user's Manual

Connecting to T2 (PU224), T2E or T2N
(1) By switch
Set the switches accordingly.
(a) mode setting switch
Switch No.
4
5
(b) DIP switch on module PCB (T2N only)
Switch No.
For RS-232
communication
DIP switch: No. 1 ON (RS-232C)
*1 Can be used as RS-422.
(2) Transmission parameter setting
Enter the transmission parameters.
Item
*1*2*3
4800bps, 9600bps, 19200bps
Transmission speed
Data Bit 7bit
Stop Bit 2bit
Parity bit Even
Station No. 1
*1 Indicates only the transmission speeds that can be set on
the GOT side.
*2 Fixed to 9600bps for T2E only.
*3 Set the same transmission speed as that of the GOT side.
Setting Settings
OFF (fixed)
Computer link
OFF (fixed)
Set value
For RS-422
communication
*1
OFF (RS-485 )
Set value

Connecting to T3 or T3H
Enter the transmission parameters.
Item
*1*2
4800bps, 9600bps, 19200bps
Transmission speed
Data Bit 7bit
Stop Bit 2bit
Parity bit Even
Station No. 1
*1 Indicates only the transmission speeds that can be set on
the GOT side.
*2 Set the same transmission speed as that of the GOT side.

Connecting to model 2000 (S2, S2T, S2E),
model 3000 (S3)
Enter the transmission parameters.
Item
Transmission method
RS485
RS485 COM1
Timeout Time 5sec
*2*3
4800bps, 9600bps, 19200bps
Transmission speed
Data Bit 7bit
Stop Bit 2bit
Parity bit Even
Station No. 1
*1 Can be used as RS-422.
*2 Indicates only the transmission speeds that can be set on
the GOT side.
*3 Set the same transmission speed as that of the GOT side.
41. CONNECTION TO TOSHIBA PLC
41.2 Serial Connection
Set value
Set value
*1
41 - 11
40
41
42
43
44
45
46
47