Got Side Settings - Mitsubishi Electric GT14 User Manual

29.4 GOT Side Settings

29.4.1 Setting communication
interface (Communication
settings)
This section explains with an example of the following
system configuration.
Direct connection to CPU 1st GOT
RS-232
Cable

Setting for the first GOT
(1) Settings of communication interface connecting to
the PLC
2.
1.
Select [Common] [Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: Mitsubishi
• Controller Type: Set according to the Controller
Type to be connected.
• I/F: Standard I/F (RS232)
• Driver: Set either of the following option according
to the Controller Type to be connected.
• Serial (MELSEC)
• MELSEC-FX
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
29.4.2 Communication detail settings
Click the OK button when settings are completed.
(2) Settings of communication interface connecting to
2nd GOT
RS-422
Cable
3.
1.
4.
2.
Click the
Click!
(3) [Transparent] setting
1.
2.
Click the
29. MULTIPLE GOT CONNECTION FUNCTION
the second GOT
2.
Select [Common] [I/F Communication Setting] from
the menu.
The I/F Connection list window is displayed. Select
the following.
• I/F-1: RS422/232
CH No.: 9
Driver: Host (PC)
OK button when settings are completed.
Select [Common] [Environment Setup]
Setup], check [Enable GOT Setup], and select the
[Transparent] menu.
2. After [CH No.] is displayed, check the channel No.
connected to the target PLC of multiple GOTs.
For details of connectable models, refer to the
following.
21. DIRECT CONNECTION TO CPU
22. COMPUTER LINK CONNECTION
OK button when settings are completed.
29.4 GOT Side Settings
25
26
27
28
Click!
29
30
31
[GOT
29 - 7