Mitsubishi Electric GT14 User Manual page 668

Hide thumbs Also See for GT14:
Table of Contents

Advertisement

(2) Connecting the GOT and PLC in computer link
connection (when connecting to QJ71C24(N))
1.
Click the Connection Destination view
Destination]
[(Connection target data name)] in the
Navigation window of GX Works2.
2.
The [Transfer Setup] is displayed.
3.
Set the [Transfer Setup]:
PC side I/F: Serial USB
PLC side I/F: GOT
Other station: No specification
4.
Double-click [Serial USB] of the PC side I/F to display
[PC side I/F Serial Setting].
5.
Check the following for [PC side I/F Serial Setting].
When connecting the GOT and PC with USB
Mark the [USB] checkbox.
31 - 32
31. FA TRANSPARENT FUNCTION
31.6 Personal Computer Side Setting
[Connection
6.
Double-click [GOT] of the PLC side I/F to display
[PLC side I/F Detailed Setting of GOT].
7.
Check-mark [C24] in [PLC side I/F Detailed Setting of
GOT].
8.
The screen returns to [Transfer Setup]. Click
connected to the QCPU (Q mode).
to check if GX Developer has been

Advertisement

Table of Contents
loading

Table of Contents