Ip Dhcp-Relay Maxhops - Allied Telesis x310-26FT Command Reference Manual

D H C
YNAMIC OST ONFIGURATION
-
IP DHCP RELAY MAXHOPS

ip dhcp-relay maxhops

Overview This command sets the hop count threshold for discarding BOOTP messages.
When the hops field in a BOOTP message exceeds the threshold, the DHCP Relay
Agent discards the BOOTP message. The hop count threshold is set to 10 hops by
default.
Use the no variant of this command to reset the hop count to the default.
For DHCP Relay Agent and DHCP Relay Agent Option 82 introductory information,
see the
ip dhcp-relay maxhops <1-255>
Syntax
no ip dhcp-relay maxhops
Default The default hop count threshold is 10 hops.
Mode Interface Configuration for a VLAN interface.
Example To set the maximum number of hops to 5 for packets received on interface
vlan15, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related service dhcp-relay
Commands
C613-50103-01 REV A
P (DHCP) C
ROTOCOL OMMANDS
DHCP Feature Overview and Configuration
Parameter
<1-255>
configure terminal
interface vlan15
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
The maximum hop count value.
ip dhcp-relay maxhops 5
Guide.
2202