Next-Server - Allied Telesis x310-26FT Command Reference Manual

D H C
YNAMIC OST ONFIGURATION
-
NEXT SERVER

next-server

Overview This command sets the next server address for a DHCP server pool. It is the address
of the next server that the client should use in its bootstrap process.
The no variant of this command removes the next server address from the DHCP
address pool.
Syntax next-server <ip-address>
no next-server
Mode DHCP Configuration
To set the next-server address for the address pool P2, use the commands:
Example
awplus#
awplus(config)#
awplus(dhcp-config)#
C613-50103-01 REV A
P (DHCP) C
ROTOCOL OMMANDS
Parameter Description
<ip-address>
The server IP address, entered in dotted decimal notation.
configure terminal
ip dhcp pool P2
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
next-server 192.0.2.2
2210