Access-List Hardware (Named Hardware Acl) - Allied Telesis x510-28GTX Command Reference Manual

IP 4 H A C
V ARDWARE CCESS ONTROL
- (
ACCESS LIST HARDWARE NAMED HARDWARE

access-list hardware (named hardware ACL)

Overview This command creates a named hardware access-list and puts you into IPv4
Hardware ACL Configuration mode, where you can add filter entries to the ACL.
Once you have configured the ACL, you can use the
access-group
The no variant of this command removes the specified named hardware ACL.
access-list hardware <name>
Syntax
no access-list hardware <name>
Mode Global Configuration
Default Any traffic on an interface controlled by a hardware ACL that does not explicitly
match a filter is permitted.
Usage Use this command to name a hardware ACL and enter the IPv4 Hardware ACL
Configuration mode. If the named hardware ACL does not exist, it will be created
after entry. If the named hardware ACL already exists, then this command puts you
into IPv4 Hardware ACL Configuration mode for that existing ACL.
Entering this command moves you to the IPv4 Hardware ACL Configuration mode
(config-ip-hw-acl prompt), so you can enter ACL filters with sequence numbers.
From this prompt, configure the filters for the ACL. See the
and Configuration Guide
numbered ACLs.
NOTE
Examples To create the hardware access-list named "ACL-1" and enter the IPv4 Hardware
ACL Configuration mode to specify the ACL filter entry, use the commands:
awplus#
awplus(config)#
awplus(config-ip-hw-acl)#
To remove the hardware access-list named "ACL-1", use the commands:
awplus#
awplus(config)#
C613-50170-01 Rev B
L (ACL) C
IST OMMANDS
ACL)
command to apply this ACL to a port, VLAN or QoS class-map.
Parameter Description
<name>
Specify a name for the hardware ACL.
: Hardware ACLs will permit access unless explicitly denied by an ACL action.
configure terminal
access-list hardware ACL-1
configure terminal
no access-list hardware ACL-1
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
for complete examples of configured sequenced
access-group or the match
ACL Feature Overview
1487