Show Ip Pim Dense-Mode Mroute - Allied Telesis x510-28GTX Command Reference Manual

PIM-DM C
OMMANDS
-
SHOW IP PIM DENSE MODE MROUTE

show ip pim dense-mode mroute

Overview This command displays the IP PIM-DM multicast routing table.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ip pim dense-mode mroute
Mode User Exec and Privileged Exec
awplus#
Example
Output Figure 35-4: Example output from the show ip pim dense-mode mroute
C613-50170-01 Rev B
show ip pim dense-mode mroute
command
PIM-DM Multicast Routing Table

(192.168.10.52, 224.1.1.1)

Source directly connected on vlan3

State-Refresh Originator State: Originator

Upstream IF: vlan3, State: Forwarding

Downstream IF List:

vlan2, in 'olist':

Downstream State: NoInfo

Assert State: NoInfo
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
1458