Show Ipv6 Ospf Database Router - Allied Telesis x510-28GTX Command Reference Manual

OSPF 3 IP 6 C
V FOR V OMMANDS
6
SHOW IPV OSPF DATABASE ROUTER

show ipv6 ospf database router

Overview Use this command in User Exec or Privileged Exec modes to display information
only about the router LSAs.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ipv6 ospf database router <adv-router-id>
[self-originate|adv-router <adv-router-id>]
Mode User Exec and Privileged Exec
Examples To display information about the OSPFv3 router LSAs, use the following command:
awplus#
Output Figure 28-11: Example output from the show ipv6 ospf database router
C613-50170-01 Rev B
Parameter
<adv-router-id>
self-originate
adv-router
show ipv6 ospf database router
command
OSPFv3 Router with ID (0.0.1.3) (Process P10)

Router-LSA (Area 0.0.0.0)

LS age: 556
LS Type: Router-LSA
Link State ID: 0.0.0.0
Advertising Router: 0.0.1.1
LS Seq Number: 0x800000CA
Checksum: 0xAA23
Length: 56
Flags: 0x02 (-|-|E|-)
Options: 0x000013 (-|R|-|-|E|V6)
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The router ID of the advertising router, in IPv4 address format.
Note, however, that this no longer represents a real address.
Self-originated link states.
The advertising router selected.
"Getting Started
Guide.
1148