Xilinx 7 Series User Manual page 52

Chapter 2: Shared Features
Table 2-19: RX Initialization and Reset Attributes (Cont'd)
RXPMARESET_TIME
RXCDRPHRESET_TIME
RXCDRFREQRESET_TIME
RXLPMRESET_TIME
RXISCANRESET_TIME
RXPCSRESET_TIME
RXBUFRESET_TIME
52
Send Feedback
Attribute Type
5-bit Binary
5-bit Binary
5-bit Binary
7-bit Binary
5-bit Binary
5-bit Binary
5-bit Binary
www.xilinx.com
Description
Reserved. Represents the time duration to apply the
RX PMA reset. The recommended value from the
7 Series FPGAs Transceivers Wizard should be
used. Must be a non-zero value when using
GTRXRESET or RXPMARESET to initiate reset
process.
Reserved. Represents the time duration to apply RX
CDR Phase reset. Must be a non-zero value when
using RXCDRRESET to initialize the reset process.
Reserved. Represents the time duration to apply the
RX CDRFREQ reset. The recommended value
from the 7 Series FPGAs Transceivers Wizard
should be used. Must be a non-zero value when
using RXCDRFREQRESET to initiate the reset
process.
Reserved. Represents the time duration to apply the
RX LPM reset. The recommended value from the
7 Series FPGAs Transceivers Wizard should be
used. Must be a non-zero value when using
RXLPMRESET to initiate the reset process.
Reserved. Represents the time duration to apply the
RX EYESCAN reset. The recommended value
from the 7 Series FPGAs Transceivers Wizard
should be used. Must be a non-zero value when
using EYESCANRESET_TIME to initiate the reset
process.
Reserved. Represents the time duration to apply the
RX PCS reset. The recommended value from the
7 Series FPGAs Transceivers Wizard should be
used. Must be a non-zero value when using
RXPCSRESET to initiate the reset process.
Reserved. Represents the time duration to apply the
RX BUFFER reset. The recommended value from
the 7 Series FPGAs Transceivers Wizard should be
used. Must be a non-zero value when using
RXBUFRESET to initiate the reset process.
7 Series FPGAs GTP Transceivers User Guide
UG482 (v1.9) December 19, 2016