Xilinx 7 Series User Manual page 221

Table 5-2: Artix-7 Devices, Packages, GTP Transceivers, and Power Planes
Notes:
1. Single: GTP Quad is powered by a single set of power planes (MGTAVCC, MGTAVTT).
2. G10: GTP Quad is powered by the G10 set of package power planes. (MGTAVCC_G10, MGTAVTT_G10).
3. G11: GTP Quad is powered by the G11 set of package power planes. (MGTAVCC_G11, MGTA References to
4. References to the XC part numbers also apply to the XA and XQ part numbers where available.
Zynq®-7000 AP SoC connected GTP Quads are described in
Table 5-3: Zynq-7000 Devices, Packages, GTP Transceivers, and Power Planes
Figure 5-3
groups. The grouping for the GTP Quads depends on the device package. The FGG484, FBG484,
CPG236, CLG485, CSG325, and SBG485 packages have a single common power plane for each of
the MGT supplies. The FGG676 and FBG676 packages have two power planes for each of the MGT
supplies. The FFG1156 package also has two power planes for each of the MGT supplies.
7 Series FPGAs GTP Transceivers User Guide
UG482 (v1.9) December 19, 2016
MGT113
XC7A200T-FFG1156
the XC part numbers also apply to the XA and XQ part numbers where available. VTT_G11).
XC7Z012S-CLG485
XC7Z015-CLG485
shows the orientation in the device package pin field of the GTP Quads and power supply
www.xilinx.com
Pin Description and Design Guidelines
Artix-7 FPGA GTP Transceivers
MGT213
G10 G10
Zynq-7000 AP SoC GTP Transceivers
MGT112
Single
Single
MGT116 MGT216
G11 G11
Table 5-3.
Send Feedback
221