Xilinx 7 Series User Manual page 12

Chapter 1: Transceiver and Tool Overview
The GTP transceiver offers a data rate range and features that allow physical layer support for
various protocols including:
•
•
•
•
•
•
•
•
•
The CORE Generator™ tool includes a wizard to automatically generate predefined settings to
configure GTP transceivers to support configurations for different protocols. The wizard can also be
used to create custom configurations. For a complete list of protocols and electrical specifications
enabled through predefined settings, please refer to PG168, 7 Series FPGAs Transceivers Wizard
LogiCORE IP Product Guide.
In comparison to prior generation transceivers in Spartan®-6 FPGAs, the GTP transceiver in the 7
series FPGAs has the following new or enhanced features:
•
•
•
•
The first-time user is recommended to read High-Speed Serial I/O Made Simple
discusses high-speed serial transceiver technology and its applications.
Figure 1-1, page 13
(XC7A100T). This device has 8 GTP transceivers.
12
Send Feedback
PCI Express, Revision 1.1/2.0
Interlaken
10 Gb Attachment Unit Interface (XAUI), Reduced Pin eXtended Attachment Unit Interface
(RXAUI)
Common Packet Radio Interface (CPRI™)/Open Base Station Architecture Initiative (OBSAI)
OC-48
OTU-1
Serial RapidIO (SRIO)
Serial Advanced Technology Attachment (SATA)/Serial Attached SCSI (SAS)
Serial Digital Interface (SDI)
2-byte internal datapath
Two ring oscillator PLLs per Quad
Power-efficient, adaptive continuous time linear equalizer (CTLE)
RX margin analysis feature to provide non-destructive, 2-D post-equalization eye scan.
shows the GTP transceiver placement in an example Artix™-7 device
www.xilinx.com 7 Series FPGAs GTP Transceivers User Guide
UG482 (v1.9) December 19, 2016
[Ref 1], which