Xilinx 7 Series User Manual page 140

Chapter 4: Receiver
Table 4-10: RX Equalizer Attributes
ADAPT_CFG0
RX_LPM_HOLD_DURING_EIDLE
RXLPMRESET_TIME
RXLPM_CFG
RXLPM_CFG1
RXLPM_HF_CFG2
RXLPM_HF_CFG
RXLPM_BIAS_STARTUP_DISABLE
RXLPM_LF_CFG
140
Send Feedback
Attribute
www.xilinx.com
Type Description
20-bit Binary Reserved. The recommended value
from the 7 Series FPGAs
Transceivers Wizard should be used.
1-bit Binary When set to 1'b1, all adapted values
for the LPM and offset cancellation
are held when the GTP transceiver
RX is in electrical idle and restored
after electrical idle is exited.
7-bit Binary Reserved. The recommended value
from the 7 Series FPGAs
Transceivers Wizard should be used.
1-bit Binary Reserved. The recommended value
from the 7 Series FPGAs
Transceivers Wizard should be used.
4-bit Binary Reserved. The recommended value
from the 7 Series FPGAs
Transceivers Wizard should be used.
4-bit Binary Reserved. The recommended value
from the 7 Series FPGAs
Transceivers Wizard should be used.
14-bit Binary Reserved. The recommended value
from the 7 Series FPGAs
Transceivers Wizard should be used.
1-bit Binary Reserved. The recommended value
from the 7 Series FPGAs
Transceivers Wizard should be used.
18-bit Binary Reserved. The recommended value
from the 7 Series FPGAs
Transceivers Wizard should be used.
7 Series FPGAs GTP Transceivers User Guide
UG482 (v1.9) December 19, 2016