Xilinx 7 Series User Manual page 189

Table 4-34: RX Buffer Attributes (Cont'd)
Attribute
RXBUF_RESET_ON_EIDLE
RXBUF_RESET_ON_RATE_CHANGE
RXBUF_THRESH_OVRD
RXBUF_THRESH_OVFLW
RXBUF_THRESH_UNDFLW
RXBUFRESET_TIME
Using the RX Elastic Buffer
These settings are used to enable the RX elastic buffer to resolve phase differences between the
XCLK and RXUSRCLK domains:
•
•
7 Series FPGAs GTP Transceivers User Guide
UG482 (v1.9) December 19, 2016
Type
String
String
String
Integer
Integer
5-bit Binary
RXBUF_EN = TRUE
RX_XCLK_SEL = RXREC
www.xilinx.com
Description
GTP transceiver internally generated RX elastic buffer reset on
electrical idle.
TRUE: Enables auto reset of RX elastic buffer during an optional
reset sequence of an electrical idle state as used in PCI Express
operation.
FALSE: Disables auto RX elastic buffer reset on electrical idle.
This should be the default setting.
Note: For channels with large attenuation (lossy channels typically
exceeding 15 dB at Nyquist), it is recommended that
RXBUF_RESET_ON_EIDLE should be set to FALSE because fast
transitioning data patterns like the 101010 sequence in
CJPAT/CJTPAT can accidentally trigger an electrical idle.
GTP transceiver internally generated RX elastic buffer reset on rate
change.
TRUE: Enables auto RX elastic buffer reset on rate change.
FALSE: Disables auto RX elastic buffer reset on rate change.
RX elastic buffer threshold override.
TRUE: Use the RXBUF_THRESH_OVFLW and
RXBUF_THRESH_UNDFLW attributes to set the RX elastic
buffer overflow and underflow thresholds, respectively.
FALSE: Automatically calculates the RX elastic buffer overflow
and underflow thresholds. This is the recommended default
setting.
RX elastic buffer overflow threshold specified as the number of
bytes. If the data latency through the RX elastic buffer is at or above
this threshold, the buffer is considered to be in an overflow
condition. Used when RXBUF_THRESH_OVRD = TRUE.
Reserved. The recommended value from the 7 Series FPGAs
Transceivers Wizard should be used.
RX elastic buffer underflow threshold specified as number of bytes.
If the data latency through the RX elastic buffer is at or below this
threshold, the buffer is consider to be in underflow condition. Used
when RXBUF_THRESH_OVRD = TRUE.
Reserved. The recommended value from the 7 Series FPGAs
Transceivers Wizard should be used.
RX elastic buffer reset time.
Reserved. The recommended value from the 7 Series FPGAs
Transceivers Wizard should be used.
RX Elastic Buffer
189
Send Feedback