Hitachi Compute Blade 2000 User Manual page 318

Power save setting: Power save setting sub menu
On the Properties: Controller properties submenu 2 screen, click
Manage Powersave > Settings to show the following screen. This item,
however, is not supported by this system. Leave all values at their default
setting.
Setting item
Specify the power save
A
setting below *1
B Unconfigured drivers
C Hot spare drives
D Configured drives
Description
Displays disk power saving settings
Enables/Disables unused disks.
Enables/Disables a hot-spared disk.
Enables/Disables disks used for disk
arrays.
267
Setting/display value **
Setting items is described in
item B to D.
Checked: enabled
[Unchecked: disabled]
Checked: enabled
[Unchecked: disabled]
Checked: enabled
[Unchecked: disabled]