Hitachi Compute Blade 2000 User Manual page 316

Firmware version; 2.120.233-1474 or later
Stop CC On Error, Schedule CC, Maintain PD Fail History,
Disk Activity and Manage Powersave are not supported.
Do not set those items.
Setting item
A Stop CC On Error *1
B Schedule CC *1
Maintain PD Fail History
C
*1
D Stop On Error *2
E Controller BIOS
F Disc Activity *1
G Manage Powersave *1
*1 Do not set this item, which is not supported.
*2 Make sure to use this item with the default setting.
Description
Sets an operation when an error is
detected at the consistency check.
Sets a consistency check schedule.
Sets whether or not a failed hard
disk can be used.
Sets whether or not to boot the OS
when an error is detected at the
system startup.
Sets the disk array controller BIOS
Sets hard disk LED switching.
Manages power saving
265
Setting/display value **
[No (continuous operation)] /
Yes (stops the consistency check.)
When clicking [Supported], the
screen moves to "Schedule CC
Page: Schedule Consistency
Check setting submenu".
[Enabled (Registers failed hard
disk information.)] /
Disabled (Not registers failed hard
disk information.)
[Disabled)] / Enabled
[Enabled )] / Disabled
[Disabled)] / Enabled
Click "Settings" to go to Power
save setting: Power save setting
sub menu .