Hitachi Compute Blade 2000 User Manual page 310

Controller properties: Menu for setting the disk array controller board
You can display and set the hardware information about the disk array controller
board.
Select Controller Properties from the main menu. The following screen appears:
Firmware version; 2.110.63-1184
Display item
A Serial Number
B FRU
C SubVendorID
D Drive Security Capable
E SubDeviceID
F PortCount
G HostInterface
H NVRAM Size
I Firmware Version
J Memory Size
K FW Package Version
L Min Stripe Size
M Firmware Time
N Max Stripe Size
O WebBIOS Version
P Virtual Drive Count
Q Disk Count
R Hot Spare Spin Down
S Unconfig Good Spin Down
T Spin Down Time
You cannot change those settings for the items displayed
here.
What is displayed
Serial number
Board name per maintenance
Sub-vendor ID
Encryption function: Enable or Disable
Sub-device ID
Number of ports installed
Host interface
Size of non volatile RAM (NVRAM) installed
Firmware version
Size of memory installed
Firmware package version
Minimum stripe size
Current time at which the firmware acquires
Maximum stripe size
MegaRAID WebBIOS version
Exisiting number of array configurations (logical devices)
Number of physical devices installed
Power capping mode set to a hard disk with hotspare
Power capping mode set to unused hard disks
Time required for the power capping mode
259