Hitachi Compute Blade 2000 User Manual page 326

 Switching the display mode
This section describes switching disk array display modes in the main menu.
There are two types of display mode: Logical View and Physical View
The Logical View mode displays a list of disk array configurations that are already
set, physical hard disks comprising a disk array configuration, and hot spare
information.
The Physical View mode displays a list of physical hard disks.
The Logical View mode is applied when the

MegaRAID WebBIOS is started.
To switch to the physical view mode, click

Physical View in the Logical View mode from the
main menu.
To switch to the logical view mode, click Logical

View in the Physical View mode from the main
menu.
275
Logical View mode:
Disk array/Physical hard
disks/Global hot spare
Physical View mode:
List of physical hard disks