Resequence Prefix-List Ipv4 - Dell Z9500 Command Reference Manual

Step-to-
Increment
Defaults The sequence number of ACL entries increases in multiples of 5; for example, seq
5, seq 10, seq 15 ...
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
8.1.1.0
7.8.1.0
7.6.1.0
7.5.1.0
7.4.1.0
Usage
When you have exhausted all the sequence numbers, this feature permits re-
Information
assigning a new sequence number to entries of an existing access-list.
Related

resequence prefix-list ipv4

Commands
resequence prefix-list ipv4
Re-assign sequence numbers to entries of an existing prefix list.
Z9500
Syntax
resequence prefix-list ipv4 {prefix-list-name StartingSeqNum
Step-to-increment}
Access Control Lists (ACL)
Enter the step to increment the sequence number. For IPv4
and IPv6 ACLs, the range is 0 to 4294967290; for MAC ACLs,
the range is 0 to 65535.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale (IPv6).
Introduced on the E-Series ExaScale (IPv4).
Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names were up to 16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— resequences a prefix list.
229