Default-Router - Dell Networking 7048 Reference Manual

Command Mode
DHCP Pool Configuration mode
User Guidelines
Use the show ip dhcp pool
parameters. The client name should not include the domain name as it is
specified separately by the
is not recommended to use embedded blanks in client names.
Example
console(config-dhcp-pool)#client-identifier 01:03:13:18:22:33:11
console(config-dhcp-pool)#host 192.168.21.34 32
console(config-dhcp-pool)#client-name Line_Printer_Hallway

default-router

Use the default-router command in DHCP Pool Configuration mode to set
the IPv4 address of one or more routers for the DHCP client to use. Use the
no form of the command to remove the default router configuration. Use the
show ip dhcp pool
Syntax
ip-address1
default-router {
no default-router
Parameter Description
Parameter
ip-address1
ip-address2
Default Configuration
No default router is configured.
command to display pool configuration
domain-name (IP DHCP Pool Config)
command to display pool configuration parameters.
ip address2
}[
Description
The IPv4 address of the first default router for the DHCP
client.
The IPv4 address of the second default router for the DHCP
client.
DHCP Server and Relay Agent Commands
]
command. It
911