D-Link DXS-3600 Series Reference Manual page 1225

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
,
-
mac-vlan
subnet-vlan
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the parameters for all configured VLANs or one VLAN on the switch.
Example
This example shows how to display all the current VLAN entries.
Switch# show vlan
VLAN 1
Name : default
Tagged Member Ports
Untagged Member Ports : 1/0/1-1/0/8
Total Entries : 1
Switch#
This example shows how to display the PVID, ingress checking, and acceptable frame type information
for ports eth1/0/1-1/0/4.
Switch# show vlan interface eth1/0/1-1/0/4
eth1/0/1
VLAN mode
Native VLAN
Trunk allowed VLAN
Ingress checking
Acceptable frame type
Dynamic Tagged VLAN
eth1/0/2
VLAN mode
Access VLAN
Ingress checking
Acceptable frame type
eth1/0/3
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No space before and after the
comma.
(Optional) Specifies a range of interfaces. No space before and after
the hyphen.
(Optional) Specifies to display MAC-based VLAN information.
(Optional) Specifies to display subnet-based VLAN information.
:
: Trunk
: 5 (Untagged)
: 2,4,5,6
: Enabled
: Admit-all
: 100
: Access
: 2
: Enabled
: Untagged-only
1225