Ip Bgp Neighbor In-Aspathlist - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip bgp neighbor in-aspathlist

Assigns an inbound AS path list filter to a BGP peer.
ip bgp neighbor ip_address in-aspathlist {string | none}
Syntax Definitions
ip_address
string
none
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
The AS path list name (InboundASpath in the example below) is created using the
aspath-list command. Any inbound routes from the BGP peer must match this AS path filter before
being accepted or passed to inbound policy.
•
To deassign an input AS path filter list, use this command to assign a value of none.
Examples
-> ip bgp neighbor 172.22.2.115 in-aspathlist InboundASpath
-> ip bgp neighbor 172.22.2.115 in-aspathlist none
Release History
Release 6.1; command was introduced.
Related Commands
ip bgp policy aspath-list
MIB Objects
alaBgpPeerTable
alaBgpPeerAspathListIn
page 25-86
32-bit IP address of the BGP peer.
Inbound AS path list (0 to 70 characters). This name is case sensitive.
Removes this AS path list from the peer.
Creates or removes an AS path list.
ip bgp policy
OmniSwitch CLI Reference Guide
BGP Commands
June 2012