Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1134

Complete Software Guide for Junos
preprovisioned
Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
1030
®
OS for EX Series Ethernet Switches, Release 10.4
preprovisioned;
[edit virtual-chassis]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Enable the preprovisioned configuration mode for a Virtual Chassis configuration.
When the preprovisioned configuration mode is enabled for an EX4200 Virtual Chassis,
you cannot use the CLI or the J-Web interface to change the mastership priority or member
ID of member switches.
You must use this statement to configure an EX8200 Virtual Chassis. Nonprovisioned
configuration of an EX8200 Virtual Chassis is not supported.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Example: Configuring an EX4200 Virtual Chassis Using a Preprovisioned Configuration
File on page 952
Example: Setting Up a Full Mesh EX8200 Virtual Chassis with Two EX8200 Switches
and Redundant XRE200 External Routing Engines on page 1087
Configuring an EX4200 Virtual Chassis (CLI Procedure) on page 981
Configuring an EX8200 Virtual Chassis (CLI Procedure) on page 1093
Configuring an EX4200 Virtual Chassis (J-Web Procedure) on page 985
Adding a New Switch to an Existing EX4200 Virtual Chassis (CLI Procedure) on page 986
Replacing a Member Switch of an EX4200 Virtual Chassis Configuration (CLI Procedure)
on page 991
Copyright © 2010, Juniper Networks, Inc.