Complete Software Guide for Junos
Configuring Automatic Software Update on EX4200 Virtual Chassis Member Switches
(CLI Procedure)
Related
Documentation
1004
®
OS for EX Series Ethernet Switches, Release 10.4
Understanding EX4200 Virtual Chassis Configuration on page 904
The automatic software update feature allows you to automatically update the software
version on prospective member switches as they are added so that they can join an
EX4200 Virtual Chassis configuration.
Before you begin, ensure that you know the name or the URL of the software package
to be used by the automatic software update feature.
To configure the automatic software update feature:
[edit]
user@switch# set virtual-chassis auto-sw-update package-name package-name
If the software package is located on a local directory on the switch, use the following
format for
:
package-name
/pathname/package-name
If the software package is to be downloaded and installed from a remote location, use
one of the following formats:
ftp://hostname/pathname/package-name
ftp://username:prompt@ftp.hostname.net/package-name
http://hostname/pathname/package-name
Example: Configuring Automatic Software Update on EX4200 Virtual Chassis Member
Switches on page 977
Understanding Automatic Software Update on EX4200 Virtual Chassis Member
Switches on page 915
Copyright © 2010, Juniper Networks, Inc.