Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1106

Complete Software Guide for Junos
Disabling Fast Failover in an EX4200 Virtual Chassis
Related
Documentation
1002
®
OS for EX Series Ethernet Switches, Release 10.4
While fast failover is enabled by default on dedicated Virtual Chassis ports (VCPs) on
an EX4200 switch, you can manually disable fast failover on dedicated VCPs on an
EX4200 switch.
To disable the fast failover feature on all dedicated VCPs in a ring:
[edit]
user@switch# set virtual-chassis fast-failover vcp disable
To disable the fast failover feature on all XFP uplink module VCPs in a ring:
[edit]
user@switch# delete virtual-chassis fast-failover xe
To disable the fast failover feature on all SFP uplink module VCPs in a ring:
[edit]
user@switch# delete virtual-chassis fast-failover ge
Example: Configuring Fast Failover on Uplink Module VCPs to Reroute Traffic When
an EX4200 Virtual Chassis Switch or Intermember Link Fails on page 963
Configuring Fast Failover in an EX4200 Virtual Chassis on page 1001
Setting an EX4200 Switch Uplink Module Port as a Virtual Chassis Port (CLI Procedure)
on page 994
Configuring an EX4200 Virtual Chassis (CLI Procedure) on page 981
Configuring an EX4200 Virtual Chassis (J-Web Procedure) on page 985
Understanding Fast Failover in an EX4200 Virtual Chassis on page 906
Copyright © 2010, Juniper Networks, Inc.