Linecard Role - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

no-management-vlan
Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Configuring an EX4200 Virtual Chassis (J-Web Procedure) on page 985
Understanding EX4200 Virtual Chassis Components on page 893
Understanding EX8200 Virtual Chassis Components on page 1072
no-management-vlan;
[edit virtual-chassis member member-id]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Remove the specified member's out-of-band management port from the Virtual
Management Ethernet (VME) global management VLAN of the Virtual Chassis
configuration.
For a member that is functioning in a linecard role, you can use this configuration to
reserve the member's management Ethernet port for local troubleshooting:
virtual-chassis {
member 2 {
no-management-vlan;
}
}
You cannot configure the IP address for a local management Ethernet port using the CLI
or the J-Web interface. To do this, you need to use the shell
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Example: Setting Up a Multimember EX4200 Virtual Chassis Access Switch with a
Default Configuration on page 927
Configuring the Virtual Management Ethernet Interface for Global Management of an
EX4200 Virtual Chassis (CLI Procedure) on page 999
Understanding Global Management of an EX4200 Virtual Chassis on page 899
Chapter 42: Configuration Statements for EX4200 Virtual Chassis
command.
ifconfig
1027