Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1102

Complete Software Guide for Junos
Setting an Uplink Module Port or an EX4200-24F Network Port as a Virtual Chassis
Port Using the LCD Panel
998
®
OS for EX Series Ethernet Switches, Release 10.4
You can interconnect EX4200 switches that are beyond the reach of the Virtual Chassis
cables as members of an EX4200 Virtual Chassis configuration by installing the optional
SFP uplink module, SFP+ uplink module, or XFP uplink module and connecting the uplink
module ports. You can also use the network ports on EX4200-24F switches to
interconnect Virtual Chassis member switches. To use the uplink module ports or the
EX4200-24F network ports for interconnecting member switches, you must explicitly
set the ports as Virtual Chassis Ports (VCPs).
This topic describes how to set the uplink module ports and the EX4200-24F network
ports as VCPs using the LCD panel on the front of EX4200 switches.
In this procedure, we show how to configure uplink module port
To set an uplink module port as a VCP using the LCD panel:
Press until you see
1. Menu
Press Menu until you see
2.
Press . You will see
3. Enter
Press . You will see
Enter
4.
Press . You will see
5. Enter
Press until you see
Menu
6.
Press . You will see
7. Enter
Press until you see
Menu
8.
Press Enter . You will see
9.
Once the configuration has been accepted, press
10.
menu.
You can also use the LCD panel to delete a VCP, thus resetting the port to an uplink
module port or an EX4200-24F network port.
To reset to an uplink module port using the LCD panel:
vcp-0/1/2
Press until you see
Menu
1.
Press until you see
2. Menu
Press . You will see
Enter
3.
Press . You will see
4. Menu
Press . You will see
Enter
5.
Press Enter . You will see
6.
Press until you see
Menu
7.
.
MAINTENANCE MENU
REQUEST VC PORT .
.
SET VC PORT?
.
SET FPC 0?
.
SET PIC 0?
.
SET PIC 1?
.
SET PORT 0?
.
SET PORT 2?
CONFIGURING ... .
Enter
.
MAINTENANCE MENU
.
REQUEST VC PORT
.
SET VC PORT?
.
DELETE VC PORT?
.
DELETE FPC 0?
DELETE PIC 0? .
.
DELETE PIC 1?
as a VCP.
ge-0/1/2
to return to the
MAINTENANCE
Copyright © 2010, Juniper Networks, Inc.