Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1151

vcp-0 disable vcp-0 disable
(EX4200 Virtual (EX4200 Virtual
Chassis) Chassis)
request virtual-chassis
vc-port set fpc-slot 4
pic-slot 0 port 2
member 1 (EX8200
Virtual Chassis)
request virtual-chassis
vc-port set interface
vcp-0 member 3
disable (EX8200
Virtual Chassis)
Copyright © 2010, Juniper Networks, Inc.
user@external-routing-engine>
request virtual-chassis vc-port set fpc-slot 4 pic-slot 0 port 2 member 1
To check the results of this command, use the show virtual-chassis vc-port command.
user@external-routing-engine> request virtual-chassis vc-port set interface vcp-0 member
3 disable
To check the results of this command, use the show virtual-chassis vc-port command.
Chapter 43: Operational Commands for EX4200 Virtual Chassis
1047