Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1133

package-name
Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
package-name package-name;
[edit virtual-chassis auto-sw-update]
Statement introduced in Junos OS Release 10.0 for EX Series switches.
Specify the software package name or location of the software package to be used by
the automatic software update feature for Virtual Chassis configurations.
No package name is specified.
—Name of the software package or the URL to the software package to
package-name
be used.
If the software package is located on a local directory on the switch, use the following
format for package-name
/pathname/package-name
If the software package is to be downloaded and installed from a remote location, use
one of the following formats:
ftp://hostname/pathname/package-name
ftp://username:prompt@ftp.hostname.net/package-name
http://hostname/pathname/package-name
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Example: Configuring Automatic Software Update on EX4200 Virtual Chassis Member
Switches on page 977
Configuring Automatic Software Update on EX4200 Virtual Chassis Member Switches
(CLI Procedure) on page 1004
Chapter 42: Configuration Statements for EX4200 Virtual Chassis
:
1029