Data-Flow-Format (Radius Scheme View) - HP 6125XLG Command Reference Manual

Default
The accounting-on feature is disabled.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
interval seconds: Specifies the time interval for retransmitting an accounting-on packet in seconds. The
value range for the seconds argument is 1 to 15, and the default setting is 3 seconds.
send send-times: Specifies the maximum number of accounting-on packet transmission attempts. The
value range for the send-times argument is 1 to 255, and the default setting is 50.
Usage guidelines
The accounting-on feature enables the device to, after rebooting, automatically send an accounting-on
packet to the RADIUS accounting server indicated by the RADIUS scheme to stop accounting for and log
out online users.
After executing the accounting-on enable command, execute the save command to make sure that the
command takes effect after the device reboots. For information about the save command, see
Fundamentals Command Reference.
Parameters set with the accounting-on enable command take effect immediately.
Examples
# Enable the accounting-on feature for RADIUS scheme radius1, and set the retransmission interval to 5
seconds and the transmission attempts to 15.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] accounting-on enable interval 5 send 15
Related commands
display radius scheme

data-flow-format (RADIUS scheme view)

Use data-flow-format to set the data flow and packet measurement units for traffic statistics.
Use undo data-flow-format to restore the default.
Syntax
data-flow-format { data { byte | giga-byte | kilo-byte | mega-byte } | packet { giga-packet |
kilo-packet | mega-packet | one-packet } } *
undo data-flow-format { data | packet }
Default
Traffic is counted in bytes and packets.
Views
RADIUS scheme view
31