Mac-Vlan Enable; Mac-Vlan Mac-Address - HP E4510-48G Command Reference Manual

Description
Use the display mac-vlan interface command to display all the ports with MAC address-based VLAN
enabled.
Related commands: mac-vlan enable.
Examples
# Display all the interfaces with MAC address-based VLAN enabled.
<Sysname> display mac-vlan interface
MAC VLAN is enabled on following ports:
---------------------------------------
GigabitEthernet1/0/1 GigabitEthernet1/0/2 GigabitEthernet1/0/3

mac-vlan enable

Syntax
mac-vlan enable
undo mac-vlan enable
View
Ethernet port view
Default Level
2: System level
Parameters
None
Description
Use the mac-vlan enable command to enable MAC address-based VLAN on a port.
Use the undo mac-vlan enable command to disable MAC address-based VLAN on a port.
By default, MAC address-based VLAN is disabled on a port.
Examples
# Enable MAC address-based VLAN on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname–GigabitEthernet1/0/1] mac-vlan enable

mac-vlan mac-address

Syntax
mac-vlan mac-address mac-address vlan vlan-id [ priority pri ]
undo mac-vlan { all | mac-address mac-address | vlan vlan-id }
6-20