Raw-Vlan-Id Inbound - HP E4510-48G Command Reference Manual

4510g series
Table of Contents

Advertisement

The nest action cannot be applied to a VLAN or globally.
Related commands: qos policy, traffic behavior, classifier behavior.
Examples
# Configure an outer VLAN tag for a traffic behavior.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] nest top-most vlan-id 100

raw-vlan-id inbound

Syntax
raw-vlan-id inbound { all | vlan-list }
undo raw-vlan-id inbound { all | vlan-list }
View
QinQ view
Default Level
2: System level
Parameters
vlan-list: Specifies one or multiple CVLANs in the format of vlan-list = { vlan-id [ to vlan-id ] }&<1-10>.
You can provide up to 10 VLAN ID lists, by each of which you can specify an individual VLAN ID in the
form of vlan-id, or a VLAN ID range in the form of vlan-id to vlan-id, where the VLAN ID after to must
be greater than the VLAN ID before to. The vlan-id argument ranges from 1 to 4094.
all: Specifies all VLAN IDs.
Description
Use the raw-vlan-id inbound command to tag frames of the specified CVLANs with the current
SVLAN.
Use the undo raw-vlan-id inbound command to remove the configuration.
You can run this command in the same view many times. A new configuration does not overwrite
the previous ones and the configured values are arranged in an ascending order automatically.
An inner VLAN tag corresponds to only one outer VLAN tag.
If you want to change the outer VLAN tag, you need to delete the old outer tag configuration and
then configure a new outer VLAN tag.
Related commands: qinq vid.
10-2

Advertisement

Table of Contents
loading

Table of Contents