Vlan Configuration Commands; Description - HP E4510-48G Command Reference Manual

6

VLAN Configuration Commands

VLAN Configuration Commands

description

Syntax
description text
undo description
View
VLAN view, VLAN interface view
Default Level
2: System level
Parameters
text: Case-sensitive string that describes the current VLAN or VLAN interface. Spaces can be included
in the description.
For a VLAN, this is a string of 1 to 32 characters.
For a VLAN interface, this is a string of 1 to 80 characters.
Description
Use the description command to configure the description of the current VLAN or VLAN interface.
Use the undo description command to restore the default.
For a VLAN, the default description is the VLAN ID, for example, VLAN 0001; for a VLAN interface, the
default description is the name of the interface, for example, Vlan-interface 1 Interface.
You can configure a description to describe the function or connection of a VLAN or VLAN interface for
management sake.
Examples
# Configure the description of VLAN 1 as RESEARCH.
<Sysname> system-view
[Sysname] vlan 1
[Sysname-vlan1] description RESEARCH
# Configure the description of VLAN-interface 2 as VLAN-INTERFACE-2.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] quit
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] description VLAN-INTERFACE-2
6-1