Configuring A Radius Scheme - HP FlexNetwork NJ5000 User Manual

•
RFC 2867, RADIUS Accounting Modifications for Tunnel Protocol Support
•
RFC 2868, RADIUS Attributes for Tunnel Protocol Support
•
RFC 2869, RADIUS Extensions

Configuring a RADIUS scheme

A RADIUS scheme defines a set of parameters that the device uses to exchange information with the
RADIUS servers. There might be authentication servers and accounting servers, or primary servers
and secondary servers. The parameters mainly include the IP addresses of the servers, the shared
keys, and the RADIUS server type. By default, no RADIUS scheme exists.
To configure a RADIUS scheme:
Select Authentication > RADIUS from the navigation tree.
1.
Figure 315 RADIUS scheme list
Click Add.
2.
Figure 316 RADIUS scheme configuration page
Configure the parameters as described in
3.
Click Apply.
4.
Table 107 Configuration items
Item
Scheme Name
Common Configuration
Table
Description
Enter a name for the RADIUS scheme.
Configure the common parameters for the RADIUS scheme, including the
298
107.