Lldp Timer Reinit-Delay; Lldp Timer Tx-Delay - HP E4510-48G Command Reference Manual

Description
Use the lldp timer notification-interval command to set the interval to send LLDP trap messages.
Use the undo lldp timer notification-interval command to restore the default.
By default, the interval to send LLDP trap messages is 5 seconds.
Examples
# Set the interval to send LLDP trap messages to 8 seconds.
<Sysname> system-view
[Sysname] lldp timer notification-interval 8

lldp timer reinit-delay

Syntax
lldp timer reinit-delay delay
undo lldp timer reinit-delay
View
System view
Default level
2: System level
Parameters
delay: Initialization delay period to be set, in the range 1 to 10 (in seconds).
Description
Use the lldp timer reinit-delay command to set the initialization delay period.
Use the undo lldp timer reinit-delay command to restore the default.
By default, the initialization delay period is 2 seconds.
Examples
# Set the initialization delay period to 4 seconds.
<Sysname> system-view
[Sysname] lldp timer reinit-delay 4

lldp timer tx-delay

Syntax
lldp timer tx-delay delay
undo lldp timer tx-delay
View
System view
5-23