Display Gvrp Local-Vlan Interface; Display Gvrp State - HP E4510-48G Command Reference Manual

display gvrp local-vlan interface

Syntax
display gvrp local-vlan interface interface-type interface-number
View
Any view
Default Level
0: Visit level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display gvrp local-vlan interface command to display the local VLAN information maintained
by GVRP on the specified port.
Examples
# Display the local VLAN information maintained by GVRP on GigabitEthernet 1/0/1.
<Sysname> display gvrp local-vlan interface gigabitethernet 1/0/1
Following VLANs exist in GVRP local database:
1(default),2-500

display gvrp state

Syntax
display gvrp state interface interface-type interface-number vlan vlan-id
View
Any view
Default Level
0: Visit level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
vlan vlan-id: Specifies a VLAN ID, in the range of 1 to 4094.
Description
Use the display gvrp state command to display the current GVRP state.
Examples
# Display the GVRP state of VLAN 2, which GigabitEthernet 1/0/1 belongs to.
<Sysname> display gvrp state interface gigabitethernet 1/0/1 vlan 2
9-3