Isolate-User-Vlan - HP E4510-48G Command Reference Manual

Isolate-user-VLAN type : secondary
Route Interface: configured
IP Address: 2.2.2.2
Subnet Mask: 255.255.255.0
Description: VLAN 0003
Name: VLAN 0003
Tagged Ports: none
Untagged Ports:
GigabitEthernet1/0/2
VLAN ID: 4
VLAN Type: static
Isolate-user-VLAN type : secondary
Route Interface: not configured
Description: VLAN 0004
Name: VLAN 0004
Tagged Ports: none
Untagged Ports:
GigabitEthernet1/0/2
Table 7-1 display isolate-user-vlan command output description
Field
Isolate-user-VLAN VLAN ID
Secondary VLAN ID
VLAN ID
VLAN Type
Isolate-user-VLAN type
Route Interface
IP Address
Subnet Mask
Description
Name
Tagged Ports
Untagged Ports

isolate-user-vlan

Syntax
isolate-user-vlan isolate-user-vlan-id secondary secondary-vlan-id [ to secondary-vlan-id ]
undo isolate-user-vlan isolate-user-vlan-id [ secondary secondary-vlan-id [ to secondary-vlan-id ]
GigabitEthernet1/0/3
GigabitEthernet1/0/4
Isolate-user-VLAN ID
Secondary VLAN ID
VLAN ID
VLAN type, static or dynamic
Current VLAN type, isolate-user-VLAN or secondary VLAN
Whether a VLAN interface is configured for the VLAN
IP address of the VLAN interface, if configured. This field is not
displayed if no IP address is configured for the VLAN interface.
Subnet mask of the VLAN interface, if configured. This field is not
displayed if no mask is configured for the VLAN interface.
VLAN description
Name configured for the VLAN
Ports through which packets of this VLAN are sent tagged
Ports through which packets of this VLAN are sent untagged
7-2
Description