HP E4510-48G Command Reference Manual page 210

configuration to the aggregate interface and its aggregation member ports. If the system fails to do
that on the aggregate interface, it stops applying the configuration to the aggregation member
ports. If it fails to do that on an aggregation member port, it simply skips the port and moves to the
next port. For information about Layer-2 aggregate interfaces, refer to Link Aggregation
Configuration in the Access Volume.
Currently, only hybrid ports support this feature. Before issuing this command, make sure that you
have assigned the port to the IP subnet-based VLAN to be associated with.
Related commands: display ip-subnet-vlan interface.
Examples
# Associate GigabitEthernet 1/0/1 with the IP subnet-based VLAN 3.
<Sysname> system-view
[Sysname] vlan 3
[Sysname-vlan3] ip-subnet-vlan ip 192.168.1.0 255.255.255.0
[Sysname-vlan3] quit
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] port link-type hybrid
[Sysname-GigabitEthernet1/0/1] port hybrid vlan 3 untagged
Please wait... Done.
[Sysname-GigabitEthernet1/0/1] port hybrid ip-subnet-vlan vlan 3
# Associate the hybrid Layer-2 aggregate interface Bridge-aggregation 1 with the IP subnet-based
VLAN 3 (assuming that Bridge-aggregation 1 does not have member ports).
<Sysname> system-view
[Sysname] vlan 3
[Sysname-vlan3] ip-subnet-vlan ip 192.168.1.0 255.255.255.0
[Sysname-vlan3] quit
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] port link-type hybrid
[Sysname-Bridge-Aggregation1] port hybrid vlan 3 untagged
Please wait... Done
[Sysname-Bridge-Aggregation1] port hybrid ip-subnet-vlan vlan 3
# Associate the hybrid Layer-2 aggregate interface Bridge-aggregation 1 with the IP subnet-based
VLAN 3. Among the member ports of the aggregation group corresponding to Bridge-aggregation 1,
GigabitEthernet 1/0/2 is an access port and GigabitEthernet 1/0/3 is a trunk port.
<Sysname> system-view
[Sysname] vlan 3
[Sysname-vlan3] ip-subnet-vlan ip 192.168.1.0 255.255.255.0
[Sysname-vlan3] quit
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] port link-type access
Please wait... Done.
Configuring GigabitEthernet1/0/2... Done.
Configuring GigabitEthernet1/0/3........................................... Done.
[Sysname-Bridge-Aggregation1] port link-type hybrid
[Sysname-Bridge-Aggregation1] port hybrid vlan 3 untagged
Please wait... Done.
6-31