Display Arp Ip-Address - HP E4510-48G Command Reference Manual

Field
Aging
Type
Vpn-instance Name
# Display the number of all ARP entries.
<Sysname> display arp all count
Total entry(ies): 4

display arp ip-address

Syntax
display arp ip-address [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
ip-address: Displays the ARP entry for the specified IP address.
slot slot-number: Displays the ARP entry for the specified device. If the device is in an IRF, the
slot-number argument represents the member ID of the device; if the device is not in any IRF, the
slot-number argument represents the device ID.
|: Uses a regular expression to specify the ARP entries to be displayed. For detailed information about
regular expressions, refer to Basic System Configuration in the System Volume.
begin: Displays the ARP entries from the first one containing the specified string.
exclude: Displays the ARP entries that do not contain the specified string.
include: Displays the ARP entries that contain the specified string.
regular-expression: A case-sensitive string for matching, consisting of 1 to 256 characters.
Description
Use the display arp ip-address command to display the ARP entry for a specified IP address.
Related commands: arp static, reset arp.
Examples
# Display the corresponding ARP entry for the IP address 20.1.1.1.
<Sysname> display arp 20.1.1.1
Type: S-Static
IP Address
20.1.1.1
Aging time for a dynamic ARP entry in minutes ("N/A" means unknown
aging time or no aging time)
ARP entry type: D for dynamic, S for static
Name of VPN instance. [No Vrf] means no VPN instance is configured
for the corresponding ARP.
D-Dynamic
MAC Address VLAN ID Interface
00e0-fc00-0001 N/A
Description
N/A N/A
2-5
Aging Type
S